This website works best with JavaScript enabled

отправить запрос

Режим работы:

пн-пт с 9 до 18 

+7 (812) 640-41-90

+7 (499) 455-01-20

8 (800) 555-48-12

(звоните бесплатно)

        ccm 10x15cm   ccm 10x15cm

Компания EKF представила новый периферийный модуль, выполненный в стандарте CompactPCI Serial. Модуль SU2-BALLAD имеет возможность подключения до 8 интерфейсов RS-232 как с помощью подключенного с тыльной стороны REAR модуля SUA-RIO, так и с помощью модуля расширителя, который увеличивает его высоту до 8HP. Интерфейсы RS-232 могут быть реализованы как с помощью разъемов Micro-D – до 4-х на передней панели и до 4-х на REAR модуле, так и с помощью обычных D-SUB – до 3-х на передней панели и до 4-х на задней (с высотой модуля 8HP).

Спецификация (PDF)

Общие данные


- CompactPCI® Serial

- PICMG® CompactPCI® Serial standard (CPCI-S.0)

- Single size Eurocard 3U 4HP 100x160 mm2

- Suitable for CompactPCI® Serial peripheral slot (PCI Express® enabled)

- CompactPCI® Serial backplane connector P1 for PCI Express®, single lane link

- Option CompactPCI® Serial backplane connector P4 for rear I/O


Параметры UART


- Pericom® PCI Express® Octal UART PI7C9X7958

- Eight high performance 950-class UARTs

- 16C550 software compatible

- 128-Byte FIFO for each transmitter/receiver

- Baud rate up to 15Mbps

- XON/XOFF in-band flow control

- CTS/RTS out-of-band control

- Dedicated DE (driver enable) and RE# (receiver enable) control

- Data frame 5, 6, 7, 8 and 9 bits

- Clock prescaling 4 to 46

- Windows® WHQL device driver support


Параметры RS-232


- 2.5kV Isolation barrier RS-232 transceivers (Analog Devices isoPower ADM3252E)

- Transceivers meet EIA/TIA-232-E specifications

- High data rate up to 460kbps

±8kV/±15kV ESD protection on Transceiver input/output pins

- High common-mode transient immunity >25 kV/µs

- Suitable for high noise data communications and diagnostic ports


I/O передней панели


- 4 x Front panel Micro-D 9-pin high density male connectors

- RS-232 front ports isolated against each other and board circuitry

- Micro-D cable assemblies available, e.g. Micro-D to classic style D-Sub male or female

- Ordering option D-Sub 9-pin front panel connectors (4 ports require 8HP F/P)

- Option 2 x D-SUB9 front panel connectors on request (4HP, 2 x micro ribbon flat cable assembly)

- Option 3 x D-SUB9 front panel connectors on request (4HP, front handle replaced by screw lock)

- Option 4 x D-SUB9 front panel connectors on request (8HP, 4 x micro ribbon flat cable assembly)

- Option additional 4 front panel ports RS-232 or RS-485 by means of mezzanine expansion connectors and SUA-RIO or SUB-RIO configured as mezzanine module (8HP F/P)


Опциональный Rear I/O


- 4 x Rear I/O UART ports (TTL Level), wired to P4 for optional usage with RIO module

- Each rear I/O UART port suitable for versatile use with an appropriate transceiver on a RIO module, e.g. RS-232 or RS-232, isolated or non-isolated

- Standard rear I/O modules available (SUA-RIO for 4 x RS-232 isolated, SUB-RIO for 4 x RS-485 isolated)

- Option all 8 ports available for rear I/O

- EKF offers custom specific rear I/O module design


Рабочие параметры


- Designed & manufactured in Germany

- Certified quality management according to ISO 9001

- Long term availability

- Rugged solution (coating, sealing, underfilling on request)

- RoHS compliant

- Operation temperature -40°C to +85°C (industrial temperature range)

- Storage temperature -40°C to +85°C, max. gradient 5°C/min

- Humidity 5% ... 95% RH non condensing

- Altitude -300m ... +3000m

- Shock 15g 0.33ms, 6g 6ms

- Vibration 1g 5-2000Hz

- MTBF 34.6 years

- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)